Sunday, March 10, 2013

TEA BAG tutorial

 i cannot take credit for this design.  i bought the svg.file at  if you have this file and open it, you'll find it quite intimidating.  my first time making this took me longer to figure out the file than to actually put it together.  like anything....once you've done it, you have that 'ah ha' moment! 

this is the file. i've color coded into groups to make it easier to understand what goes where.

the orange is the patterned paper. the brown is the base, and as you can see, if you're using a 12" mat, it won't all fit. you'll have to make two cuts.  i've lightened the one pc. because i'm not entirely sure what it does other than give the box a 'little more structure'.  i do use it, but i think you could 'go without this one'.
use a good heavyweight cardstock for your with most boxes.  
the two black squares are for the bottom base and for the top of the cover.  i don't use the top one.  i just don't like the looks so i'll be leaving this out.  but wanted you to know its there to use if you want. you'll have to adjust the instructions if you'll be using this. 

i broke up the group to cut the patterned paper.  obviously i don't want the same patterns for the top and bottom.

they made the file so it would fit a 12" mat.  not everyone has access to a larger mat.  therefore the box itself is made up of 2 parts. you'll want to put your adhesive on the top of the flaps on 2 sides and bottom. in the picture i have it on all 4....that is a mistake...the adhesive needs to go on the bottom of the top flap. you will know what is top and bottom.  the flaps on both box pcs.  will match. (one is a bit bigger)

now lets put it together.  line it up making sure the folds match.  

never mind the little can't see them anyway.  

now while you can lay it flat is when you want to put your patterned paper on.

  i get some cardboard or chipboard and cut 2, the same size as that base, glue them together then adhere this 3 1/2" x 3".  this gives the base of the box stability and strength.  

here is the piece i think you could live without. but i do use it..i adhere it to the inside and base.

put your top together and while still flat, add your patterned papers.

the finished box...i added a 'tea text'...i kinda like that!  

all this tea talk has made me want a cup of tea....i hope this is easy to follow.  let me know if you have any questions.  thanks for visiting.  sure would love to hear from you if you visit.


Saturday, March 9, 2013


if you've ever seen a 'DINGBAT' font, you'll know there are several different styles.  what fun!  although some are quite easy to use, others are a little more tricky.  i like to challenge myself, mostly because after all the teeth gritting, mumbling choice words under my breath and scratching my head wondering what the.......they really are nice when all is said/done.  before you even get started, do you like putting puzzles together?  that's exactly what you'll be doing if you've chosen one like this with all its' bitty pcs.  so let's have some fun!

if you have alot of small pcs, i would suggest making it large enough without it tearing when being cut. i made mine large enough to fit on an 8 1/2"x4 3/4 card.  i love the black cardstock from walmart.  when placing your cut, give yourself at least 1" on all sides of the cut so it looks like this:

carefully remove the negative, leaving your cut on your mat.  you may have a few rips and tears, but this is probably the hardest part getting that off without pcs coming with it..just pay attention to your pcs and where they are.  once your negative is off your mat, you'll have this:

next i get the piece i'll be putting the cut on... ready by just tacking it down so it won't move on my workspace.  then, lining up your negative straight over the top and using removeable adhesive, tack that down as well.

don't let this scare you off.  it isn't as bad as it looks.  

start taking your pieces off the mat, (i always start at one end and go as much in order as i can) and with a glue pen start 'putting your puzzle' together.  as i go along, i'll start snipping away at the neg. to get rid of paper in my way.  just be careful to 'not snip away' what you'll still need. 

you may want to gently keep lifting your neg. every so often to make sure it isn't getting glued down.

once all your pcs are glued in place, gently take off the rest of your negative and rub away any temporary adhesive.  now you're ready to place your mat onto your card base. 

now it's time to embellish.  

i wasn't for sure if the cross part was negative or positve, so i took the pieces and put them on the inside. either way i think it would look ok.   this also give a little  'extra' in the card.

unfortunately, when you download a dingbat font, the name of it doesn't come along...when i open mine, i get images of the alphabet.  this is some asian one, i don't know.  but it has some really cool dingbats!  i 'think' these are the letters T-U-V.  play around and have fun!  i think the dragon at the top might be a letter K.
just don't let these cool images scare you.  i really like them!  there is a really nice christmas dingbat that when you put some of the letters together, make nice borders.  another dingbat has childrens heros...too cool!  best of all!  they're free at 

thanks for visiting.